Usb Production Tool V1 34 14
Usb Production Tool V1 34 14 ---> https://blltly.com/2tA4mf
How to Use USB Production Tool V1 34 14 to Flash Firmware on ESP32/ESP8266 Devices
USB Production Tool V1 34 14 is a software tool that allows you to flash firmware on ESP32/ESP8266 devices using a USB cable. It is compatible with Windows, Linux and Mac OS X operating systems. In this article, we will show you how to download, install and use USB Production Tool V1 34 14 to flash firmware on your ESP32/ESP8266 devices.
Step 1: Download USB Production Tool V1 34 14
You can download USB Production Tool V1 34 14 from the following link: [^1^]. It is a zip file that contains the executable file and some configuration files. You will need to extract the zip file to a folder on your computer.
Step 2: Install USB Production Tool V1 34 14
To install USB Production Tool V1 34 14, you need to run the executable file as administrator. You will see a window like this:
Click on Next and follow the instructions to complete the installation. You will need to accept the license agreement and choose a destination folder for the tool. You can also create a desktop shortcut for easy access.
Step 3: Connect Your ESP32/ESP8266 Device to Your Computer
Before you can flash firmware on your ESP32/ESP8266 device, you need to connect it to your computer using a USB cable. Make sure that your device is in bootloader mode, which means that it is ready to receive firmware from the USB port. To enter bootloader mode, you need to press and hold the BOOT button on your device while plugging in the USB cable. You can release the button after you see a blue LED blinking on your device.
Step 4: Launch USB Production Tool V1 34 14 and Select Your Device
After you have connected your device to your computer, you can launch USB Production Tool V1 34 14 from the desktop shortcut or the start menu. You will see a window like this:
You need to select your device from the drop-down menu at the top left corner of the window. You can also select the COM port that your device is connected to. If you are not sure which COM port to choose, you can click on the Refresh button and see which one appears or disappears when you plug in or unplug your device.
Step 5: Choose Your Firmware File and Flash It
The next step is to choose the firmware file that you want to flash on your device. You can click on the Browse button at the bottom right corner of the window and navigate to the folder where you have saved your firmware file. The firmware file should have a .bin extension and should be compatible with your device model and version.
After you have selected your firmware file, you can click on the Start button at the bottom left corner of the window to start flashing it. You will see a progress bar and some messages indicating the status of the flashing process. When it is done, you will see a message saying \"Flash OK\". You can then disconnect your device from your computer and test it.
Conclusion
In this article, we have shown you how to use USB Production Tool V1 34 14 to flash firmware on ESP32/ESP8266 devices using a USB cable. This tool is useful for updating or changing the firmware on your devices without using an external programmer or soldering wires. We hope that this article was helpful and informative for you. 061ffe29dd